Hose clamp 2201/0010 JCB, aftermarket

Hose clamp 2201/0010 is an aftermarket part for the JCB machines.

A hose clamp presses the hose onto its spigot, keeps the joint sealed and stops the hose working off with vibration. A rusted, loose or wrongly sized clamp causes coolant loss, unfiltered air in the intake and fuel line leaks. The clamp range must suit the hose outside diameter: one that is too large cannot be tightened fully and one that is too small will not fit. A stainless steel band resists corrosion for longer. The clamp is supplied new, ready to fit. Its size is defined by the part number.

Specifications

Compatibility

Other parts are in JCB Dieselmax engine.

Fitting

Place the clamp a few millimetres in from the hose end, behind the spigot bead, and tighten it without cutting into the hose. Check the cooling hose clamps once more with the engine warm.