- BrandDGR
- Article320/06035
- Machine systemEngine
- Part typeGasket
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB Dieselmax 444
- All the features
Exhaust manifold gasket 320/06035 is an aftermarket part for the JCB Dieselmax 444 engine. The card also lists 320/06398, 320/06030, 320/06034, 320/06324, 320/06080.
A gasket seals the joint between two parts. When a removed part goes back on, the old gasket is not reused: it has been compressed, lost its elasticity and will leak. Traces of oil, coolant or exhaust at the joint, drips or a whistle show the gasket needs replacing. Check the condition of the fixing bolts along with the gasket.
Specifications
| Part number | 320/06035 |
| Cross / alternative numbers | 320/06398, 320/06030, 320/06034, 320/06324, 320/06080 |
| Production type | Aftermarket |
| Part type | Gasket |
| System / group | Engine |
| Machine make | JCB |
Compatibility
The part is listed for JCB 3CX and 4CX backhoe loaders. The gasket fits between the exhaust manifold and the head and runs hot; a leak shows as a hiss and soot marks. The catalogue also has the genuine version of this part. Other parts are in JCB Dieselmax engine.
Fitting
Use sealant only where the service manual calls for it; excess sealant can block passages. On hot joints, recheck the bolts after the engine has warmed up.
Specifications
- Machine systemEngine
- Part typeGasket
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB Dieselmax 444
No questions about this product.
