333/D4433
  • Article
    333/D4433
  • Machine system
    Engine
  • Part type
    Turbocharger
  • Manufacturing type
    Aftermarket
  • Compatibility
    Isuzu
  • All the features
In stock
0.00 ₺
We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.
Check the exact specifications and compatibility with your machine with our managers.
We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.
Free delivery to the carrier of your choice, or collect your order in Istanbul.
Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Turbocharger 333/D4433 is an aftermarket part for the Isuzu engine. The card also lists 8981851941.

The turbine wheel is driven by exhaust energy, and the compressor wheel on the same shaft pushes air into the engine. A failing turbo shows as loss of power, black or blue smoke, whistling, oil in the intake or exhaust and shaft play. Most failures come from oil starvation, dirty oil or dust passing the air filter; these causes must be cleared before a new unit is fitted. When ordering, give the engine serial number and the data from the old turbo's label. If oil has collected in the intake and intercooler after a turbo failure, clean them out as well. Because the turbo shaft spins at very high speed, oil cleanliness directly sets bearing life. The turbo bolts to the exhaust manifold by its flange; the oil feed and drain pipes and the intake and boost hoses connect around it. The wastegate actuator limits boost pressure. The turbo is supplied new. Boost pressure and wheel sizes are matched to the engine; the wrong turbo causes power loss or excessive boost. The number on the turbo label can be used when ordering.

Specifications


Part number333/D4433
Cross / alternative numbers8981851941
Production typeAftermarket
Part typeTurbocharger
System / groupEngine

Compatibility

Other parts are in Isuzu engine.

Fitting

When fitting, check the intake hoses and clamps and clean the tract so that nothing enters the compressor. Tighten the exhaust flange with new lock nuts. The oil drain pipe must be clear, otherwise oil is forced past the turbo seals.

Specifications

  • Machine system
    Engine
  • Part type
    Turbocharger
  • Manufacturing type
    Aftermarket
  • Compatibility
    Isuzu
Questions: 0
Your question:

No questions about this product.

07/10/2026 32
Isuzu 6BG1T Engine on JCB JS200–JS260: Section K of Service Manual 9803/6400
Section K of JCB service manual 9803/6400 covers the engine of the JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators. These machines are fitted with the Isuzu 6BG1T, a six-cylinder in-line turbocharged direct injection diesel. The section contains JCB technical data for these machines and the Isuzu engine repair manual: maintenance, adjustments, dismantling, inspection and assembly, lubrication, cooling and fuel systems, turbocharger, starter motor and alternator, fault finding and repair standards. The PDF has 235 pages.
Similar products
KRH0781
Lower engine mount KRH0781 JCB, aftermarket
Lower engine mount KRH0781 JCB, aftermarket
In stock
0.00 ₺
KNH0528
Front engine mount KNH0528 JCB, aftermarket
Front engine mount KNH0528 JCB, aftermarket
In stock
0.00 ₺
8979453380
Rocker cover gasket 8979453380 Isuzu, aftermarket

This site uses essential cookies (session, cart, language, currency). If you click «Accept», Google Analytics and Yandex Metrica cookies are also used for visit statistics; if you click «Decline», they are not loaded. Personal data is processed under the Turkish data protection law KVKK No. 6698. Details: Privacy and cookie policy.