Joystick handle 701/80425 JCB Loadall, aftermarket

For the JCB Loadall telehandlers: joystick handle 701/80425, an aftermarket part.

According to sources, 701/80425 is a joystick handle with two auxiliary hydraulic (2 AUX) buttons used on JCB Loadall and Telemaster telehandlers, with models 530, 531, 533, 535, 536, 540 and 541 listed in sources. The handle buttons may be assigned to functions such as the attachment lock, an auxiliary hydraulic line or gear and direction, depending on the machine's equipment. The handle harness runs inside the lever to a connector below. If one button fails, check the connector and wire first, since the constant lever movement can break the wire where it leaves the handle. The handle comes with its lead and connector.

Specifications

Compatibility

Other parts are in Switches.

Fitting

Before the change, switch off the ignition and disconnect the battery negative. Remove the joystick handle from the lever shaft and unplug its cable. Fit the new handle in the same position, route the cable so it is neither stretched nor pinched as the lever moves, and lock the connector. After the change, test every button and lever movement.