- BrandKRAUF
- Article335/E0898
- Machine systemElectrics
- Part typeAlternator
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB JS205
- Machine seriesJS200, JS205, JS210, JS220, JS330, JS330, JZ235
- Number of pulley grooves8 pcs
- Voltage24 V
- Signal typeL-W
- Mounting dimension A47 mm
- All the features
Alternator 335/E0898 is an aftermarket part for the Cummins-engined JCB JS205 excavator.
The alternator charges the battery while the engine runs and feeds the machine's electrical consumers. The rotor, driven by the engine belt, induces alternating current in the stator windings; the diode bridge rectifies it and the voltage regulator keeps the output voltage steady. A faulty alternator lights the charge warning lamp, lets the battery run flat, makes the lights dim or overcharges the battery so it gasses. Before replacing the alternator, check the belt tension, battery condition and cable connections, and measure the charging voltage at the battery terminals with the engine running. If the charge lamp stays on with the engine running, check the alternator's excitation circuit as well.
Specifications
| Part number | 335/E0898 |
| Production type | Aftermarket |
| Part type | Alternator |
| System / group | Electrics |
| Machine make | JCB |
| Series / model | JS200, JS205, JS210, JS220, JS330, JS330, JZ235 |
Compatibility
According to the product card, a 24 V, 75 A alternator with L-W terminals; the card also gives Cummins numbers 5263218 and 5263220. Other parts are in Alternators.
Fitting
Never disconnect the battery with the engine running and the alternator connected, since a voltage surge can damage the alternator diodes and electronic units. Disconnect the battery and alternator before any welding.
Specifications
- Machine systemElectrics
- Part typeAlternator
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB JS205
- Machine seriesJS200, JS205, JS210, JS220, JS330, JS330, JZ235
- Number of pulley grooves8 pcs
- Voltage24 V
- Signal typeL-W
- Mounting dimension A47 mm
- Mounting dimension C82 mm
- Mounting dimension B13 mm
- Current75 amp
- Water pumpNo
No questions about this product.
