- BrandHATVE HTV
- Article458/M1350
- Machine systemTransmission
- Part typeCrown wheel and pinion
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
- All the features
Crown wheel and pinion 458/M1350 is an aftermarket part for the JCB 3CX and 4CX backhoe loaders. The set's ratio is 13/38.
The crown wheel and pinion turn the drive from the propshaft through 90 degrees, pass it to the differential and provide the axle's main reduction. The two gears are machined and matched together, so they are always replaced as a set; a new pinion with an old crown wheel will not give the correct contact pattern and will soon become noisy. The gear ratio (pinion and crown wheel teeth) decides the axle's and machine's speed and pulling character, so the new set must have the same ratio as the old one.
Specifications
| Part number | 458/M1350 |
| Production type | Aftermarket |
| Part type | Crown wheel and pinion |
| System / group | Transmission |
| Machine make | JCB |
Compatibility
According to sources, 458/M1350 and 458/70189 are numbers of the same 13/38 M24 crown wheel and pinion, used on JCB 3C, 3CX, 3D, 4C and 4CX and 214-217 backhoe loaders. The catalogue also has the genuine version of this part. Other parts are in Reduction gears.
Fitting
Fitting a crown wheel and pinion is precise work needing measuring tools and should be done by an experienced workshop. Pinion depth is set with shims and backlash with the differential bearing adjustment, then the tooth contact pattern is checked with marking compound. Pinion bearing preload and pinion nut torque are set to the service manual. After assembly, fill the axle with the specified oil and check for whine and heat during the first hours.
Specifications
- Machine systemTransmission
- Part typeCrown wheel and pinion
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
No questions about this product.
