Crown wheel and pinion 66607 Carraro, aftermarket

66607

Article
66607
Machine system
Transmission
Part type
Crown wheel and pinion
Machine brand
CAT (Caterpillar)
Manufacturing type
Aftermarket
Compatibility
Carraro
Machine series
Various models
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Crown wheel and pinion 66607 is an aftermarket part for the backhoe loaders with Carraro axles. The set's ratio is 13/32.

Crown wheel and pinion sets differ in ratio, spiral direction (right or left hand), pinion thread and mounting dimensions, so two similar-looking sets may not fit the same axle. The set is therefore chosen by part number and the tooth counts on the old set. On four-wheel-drive machines the front and rear axle ratios must match each other, since different ratios strain the driveline and wear the tyres.

Specifications

Part number	66607
Production type	Aftermarket
Part type	Crown wheel and pinion
System / group	Transmission
Machine make	CAT (Caterpillar)

Compatibility

According to the product card, Carraro 66607 is a crown wheel and pinion; cross numbers: CA0066607, 309755A1, 6194506M91. Fit is confirmed by the axle or transmission type. Other parts are in Carraro.

Fitting

Fitting a crown wheel and pinion is precise work needing measuring tools and should be done by an experienced workshop. Pinion depth is set with shims and backlash with the differential bearing adjustment, then the tooth contact pattern is checked with marking compound. Pinion bearing preload and pinion nut torque are set to the service manual. After assembly, fill the axle with the specified oil and check for whine and heat during the first hours.