Mirror bracket, right 123/04968 JCB 3CX/4CX, aftermarket

For the JCB 3CX and 4CX backhoe loaders: mirror bracket, right 123/04968, an aftermarket part. This is the right mirror bracket.

The bracket is chosen by part number for its side (left or right), machine model and shape; the dimensions and type letters on the card (for example straight or bent arm) describe its shape. Shorter brackets are used on compact machines. The cab mounting holes and bolts are checked as well. The joint or clamp where the bracket meets the mirror must be tight enough to hold the setting; if the mirror moves with vibration, the clamp or joint is replaced. Chipped paint on the bracket is touched up against rust.

Specifications

Compatibility

According to the product card, 123/04968 is a mirror bracket. Fit is confirmed by the part number. Other parts are in Cab.

Fitting

Remove the old bracket by undoing its bolts and clean the mounting area. Fit the new bracket in the same place, with anti-vibration washers if used, and tighten the bolts. After the mirror is fitted, adjust it from the operator's seat and check that the bracket does not shake. When fitting the bracket, clean the threaded holes in the cab.