Cab mat JCB 5CX, black stitching JCB 3CX/4CX, aftermarket

For the JCB 3CX and 4CX backhoe loaders: cab mat JCB 5CX, black stitching, an aftermarket part. According to the product card, the mat is for the JCB 5CX with black stitching.

The mat is chosen for the machine model (3CX, 4CX, 5CX) and cab version, as floor shape and pedal layout differ between models. The edge stitching colour is purely a matter of appearance. The mat can be taken out, washed with water and put back once dry. The edge stitching stops the mat's edges fraying and keeps its shape. Do not use stiff brushes or solvents when cleaning it; water and a mild detergent are enough.

Specifications

Compatibility

According to the product card, the part is a cab floor mat; it has no part number, so it is chosen by machine model and appearance. Other parts are in Cab.

Fitting

Before laying the mat, clean and dry the cab floor. Lay the mat so its cut-outs line up with the pedals and levers and attach it to any fixing points. Finally, check that the pedals can be pressed fully and that the mat does not slide. Check now and then that water has not collected under the mat. The mat must match the edges of the cab floor exactly.