Bush 3520034M3 Terex, aftermarket

Bush 3520034M3 is an aftermarket part for the Terex backhoe loaders. According to the product card, this part is a bush.

When the bush is replaced, the pin is measured too, as a worn pin soon ruins a new bush. The new bush is fitted square with a suitable drift or press after the eye has been cleaned, and is never struck directly with a hammer. The grease hole in the bush is lined up with the grease passage in the eye. After assembly the joint is greased until the old grease and dirt come out, and it is greased more often during the first days. If the grease passage is blocked, the bush soon runs dry.

Specifications

Compatibility

According to the product card, the part number is 3520034M3. Fit is confirmed by the part number and the machine serial number. Other parts are in Terex bushings.

Fitting

Remove the old bush with a puller or press, clean the eye and remove any burrs. Lightly oil the new bush and press it in square to the axis, then fit the pin and grease the joint.