Bush JLV1811 JCB JS, aftermarket

JLV1811

Brand
INTER
Article
JLV1811
Machine system
Hydraulic system
Part type
Bush
Machine brand
JCB
Manufacturing type
Aftermarket
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Bush JLV1811 is an aftermarket part for the JCB JS crawler excavators. According to the product card, this part is a bush.

When the bush is replaced, the pin is measured too, as a worn pin soon ruins a new bush. The new bush is fitted square with a suitable drift or press after the eye has been cleaned, and is never struck directly with a hammer. The grease hole in the bush is lined up with the grease passage in the eye. After assembly the joint is greased until the old grease and dirt come out, and it is greased more often during the first days. If the grease passage is blocked, the bush soon runs dry.

Specifications

Part number	JLV1811
Production type	Aftermarket
Part type	Bush
System / group	Hydraulic system
Machine make	JCB

Compatibility

According to the product card, the part number is JLV1811. The card also lists JLV0085. Fit is confirmed by the part number and the machine serial number. Other parts are in JCB JS series bushings.

Fitting

Remove the old bush with a puller or press, clean the eye and remove any burrs. Lightly oil the new bush and press it in square to the axis, then fit the pin and grease the joint.

Specifications

Machine system
Hydraulic system
Part type
Bush
Machine brand
JCB
Manufacturing type
Aftermarket

Questions: 0

No questions about this product.

07/10/2026 28

JCB JS200–JS260 Undercarriage: Section J of Service Manual 9803/6400

Section J of JCB service manual 9803/6400 covers the undercarriage (track running gear) of the JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators: the idler with track adjuster, the adjuster cylinder, the drive sprocket, and the top and bottom rollers. For each assembly it gives removal and replacement, dismantling and assembly, and a wear limit table that tells you whether a part can be built up by welding or must be renewed. The PDF has 33 pages.

07/10/2026 23

JCB JS200–JS260 Mainframe, Cab and Component Weights: Service Manual Section B

Section B of JCB service manual 9803/6400 covers the body and framework, cab and excavator end of the JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators. It gives undercarriage dimensions, machine and component weights, fitted clearances and wear limits for the boom, dipper and bucket pins and bushes, the cab glazing procedure, and a description of the air conditioning with fault finding. The PDF runs to 44 pages.