Telehandler right front mudguard 400/D7801 JCB Loadall, aftermarket

Telehandler right front mudguard 400/D7801 is an aftermarket part for the JCB Loadall telehandlers. According to the product card, this part is a right front mudguard (telehandler).

The brackets and bolts of the front mudguards gradually loosen or crack under axle oscillation and vibration. When a mudguard is replaced the brackets are checked too, as a cracked bracket will soon break the new mudguard. The mudguard must not touch the tyre at full lock or full axle oscillation, so after fitting the steering is turned fully both ways and the clearance checked. The mudguard bolts are checked at every service and loose ones are tightened. After a new mudguard is fitted, the machine is given a short test drive to check that it does not vibrate.

Specifications

Compatibility

According to the product card, the part number is 400/D7801. Fit is confirmed by the part number and the machine serial number. Other parts are in Body parts.

Fitting

Before fitting, clean the mounting points and check the bolt holes and brackets. Put the new part in place of the old one, start the bolts by hand and tighten them once the part is aligned. Use new rubber mounts and washers where fitted, and after fitting check that the part does not touch any moving parts.