- BrandINTER
- Article700/00001
- Machine systemCab
- Part typeRight rear lamp guard
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
For the JCB machines: right rear lamp guard 700/00001, an aftermarket part. According to the product card, this part is a right rear lamp guard.
Guards are chosen by part number for the machine model and side; some are supplied as a set with fixings. When fitting, make sure the guard does not touch the part it protects and does not rattle under vibration. A bent guard is not straightened, as the metal fatigues and breaks at the next knock; it is replaced with a new one. The fixing bolts of guards can loosen under vibration; a loose guard rattles and eventually breaks off, so the bolts are checked during service. Rear lamp guards are designed to be removed and refitted when lamp lenses and bulbs are changed.
Specifications
| Part number | 700/00001 |
| Production type | Aftermarket |
| Part type | Right rear lamp guard |
| System / group | Cab |
| Machine make | JCB |
Compatibility
According to the product card, the part number is 700/00001. Fit is confirmed by the part number and the machine serial number. Other parts are in Body parts.
Fitting
Before fitting, clean the mounting points and check the bolt holes and brackets. Put the new part in place of the old one, start the bolts by hand and tighten them once the part is aligned. Use new rubber mounts and washers where fitted, and after fitting check that the part does not touch any moving parts.
Specifications
- Machine systemCab
- Part typeRight rear lamp guard
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
%20А_00-00000020-220x230.jpg "Plastic stabiliser lower wear pad 123/06014 JCB 3CX/4CX, aftermarket")
%20А_00-00000023-220x230.jpg "Plastic stabiliser upper wear pad 331/20552 JCB 3CX/4CX, aftermarket")
%20А_УТ-00008443-220x230.jpg "Textolite stabiliser upper wear pad 331/20552 JCB 3CX/4CX, aftermarket")
