Right horizontal bonnet corner 332/E4941 JCB, genuine

Right horizontal bonnet corner 332/E4941 is a genuine JCB part for the JCB machines. According to the product card, this part is a right horizontal bonnet corner.

The bonnet corner piece protects the edges and corners of the bonnet against knocks and gives the bonnet its finished shape. On backhoe loaders the bonnet corners are the points most exposed to hits from the bucket or load, and the corner piece takes the blow so the bonnet itself is not dented. A broken or missing corner piece lets the exposed bonnet edge rust and deform, and its sharp edges can cause injury. It also spoils the machine's appearance and makes it easier for water to get under the bonnet. The corner piece is supplied to match the bonnet colour. Before fitting the corner piece, treat the area around the screw holes with rust preventer. With the bonnet closed, check that the piece lines up with the surrounding panels.

Specifications

Compatibility

According to the product card, the part number is 332/E4941. The card also lists 346/00568. Fit is confirmed by the part number and the machine serial number. The catalogue also has the aftermarket version of this part. Other parts are in Body parts.

Fitting

Remove the old corner piece's screws or rivets, clean the bonnet edge and treat any rusty areas. Fit the new piece in the same place and secure it with screws or rivets, as overtightening can crack the plastic. After fitting, check that the bonnet opens and closes freely and that the piece does not rub on anything. There must be no gap between the piece and the bonnet when fitted.