- BrandMULTI
- Article904/50040
- Machine systemTransmission
- Part typeAxle shaft seal
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
Axle shaft seal 904/50040 is an aftermarket part for the JCB machines. This seal is the axle shaft seal.
An oil seal seals the point where a rotating shaft leaves an axle or transmission housing: its lip is pressed onto the shaft by a garter spring, keeping oil in and dust and water out. Seals at hubs, pinions, axle shafts and gearbox shafts harden or wear over time, and a leak can lower the oil level, contaminate the brake discs or leave the gears without lubrication.
Specifications
| Part number | 904/50040 |
| Production type | Aftermarket |
| Part type | Axle shaft seal |
| System / group | Transmission |
| Machine make | JCB |
Compatibility
According to the product card, 904/50040 is an oil seal; cross numbers: 904/50006. Fit is confirmed by the part number. It measures 46.15 x 80 x 16.5 mm. The catalogue also has the aftermarket version of this part. Other parts are in Seals and oil seals.
Fitting
Clean the bore, lubricate the seal's outer surface and lip with clean oil and drive it squarely into place with a mandrel of suitable diameter, since a cocked seal leaks from the first run. Watch the direction: the spring-loaded lip faces the oil. After assembly, check the oil level and look for leaks after the first hours of work.
Specifications
- Machine systemTransmission
- Part typeAxle shaft seal
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
