914/86301
  • Brand
    Oymak
  • Article
    914/86301
  • Machine system
    Transmission
  • Part type
    Axle shaft
  • Machine brand
    JCB
  • Manufacturing type
    Aftermarket
  • Compatibility
    JCB 3CX, 4CX
  • All the features
In stock
0.00 ₺
We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.
Check the exact specifications and compatibility with your machine with our managers.
We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.
Free delivery to the carrier of your choice, or collect your order in Istanbul.
Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Axle shaft 914/86301 is an aftermarket part for the JCB 3CX and 4CX backhoe loaders.

The axle shaft carries torque from the differential to the planetary gearbox at the wheel. On steered axles the shaft is split at the knuckle by a universal or constant-velocity joint. Shock loads, sudden grip after wheelspin and overloading can twist the shaft, wear its splines or break it. A broken shaft cuts drive to the wheel and causes further damage in the gearbox.

Specifications


Part number914/86301
Production typeAftermarket
Part typeAxle shaft
System / groupTransmission
Machine makeJCB

Compatibility

According to sources, 914/86301 is the 33-spline, 46 mm diameter, 511.5 mm long front axle shaft of the JCB 3CX and 4CX; the product card gives it as the 3CX right-hand axle tube shaft. Other parts are in Axle shafts, propshafts and U-joints.

Fitting

For the change, remove the wheel and planetary gearbox and drain the axle oil. Slide the new shaft carefully into place with its splines lubricated with clean axle oil, using a protective sleeve so the splines do not damage the seal lips. Renew the seals and O-rings and top up the axle oil to level. The shaft comes new; check its splines and bearing surfaces before fitting. Also inspect the other shaft in the axle and the universal joint for wear. When the axle shaft is changed, check the splines of the differential side gear and the planetary sun gear too. Shafts on the two sides of an axle may differ in length, so lay the new one beside the old one to compare. Change the axle oil and inspect the metal on the drain plug.

Specifications

  • Machine system
    Transmission
  • Part type
    Axle shaft
  • Machine brand
    JCB
  • Manufacturing type
    Aftermarket
  • Compatibility
    JCB 3CX, 4CX
Questions: 0
Your question:

No questions about this product.

07/10/2026 78
JCB 3CX / 4CX Transmission: Gearboxes, Axles, Pressures and Stall Test
Section F of the JCB service manual covers the transmission of the JCB 3C, 3CX and 4CX backhoe loaders: Synchro Shuttle SS700, Powershift PS764 and PS766 gearboxes, torque converter, front and rear axles, propshafts and oil cooler. It contains technical data, gearbox operation and electrics, pressure tests, the torque converter stall test, fault finding tables and removal procedures. This is issue 9803/3290-16 of the manual; the PDF runs to 306 pages.
Similar products
914/56401
Propshaft universal joint 914/56401 JCB 3CX/4CX, genuine
914/M7404
Axle shaft 914/60103 JCB 3CX/4CX, aftermarket
Axle shaft 914/60103 JCB 3CX/4CX, aftermarket
In stock
0.00 ₺
212.06.624.30-К
Axle shaft, short 212.06.624.30-K Dana, aftermarket
914/84501
Axle shaft 914/84501 JCB 3CX/4CX, aftermarket
Axle shaft 914/84501 JCB 3CX/4CX, aftermarket
In stock
0.00 ₺
84316955А
Axle shaft, short 84316955 Case, aftermarket
Axle shaft, short 84316955 Case, aftermarket
In stock
0.00 ₺

This site uses essential cookies (session, cart, language, currency). If you click «Accept», Google Analytics and Yandex Metrica cookies are also used for visit statistics; if you click «Decline», they are not loaded. Personal data is processed under the Turkish data protection law KVKK No. 6698. Details: Privacy and cookie policy.