Pallet fork set 980/A7929P JCB 3CX/4CX, aftermarket

For the JCB 3CX and 4CX backhoe loaders: pallet fork set 980/A7929P, an aftermarket part. According to the product card, this part is a pallet fork set.

Fork sets and fixing parts are chosen by part number for the type of attachment and machine; forks for a 6-in-1 bucket are a special set that fixes to the bucket itself. When working on forks, the machine's load chart is followed, the load's centre of gravity is kept close to the fork heel and the forks are always locked with their retaining pins. The bar and pins are checked regularly for wear and bending. The thickness of the tines is measured, and forks worn below the maker's limit or cracked at the heel are taken out of service. Fork locks and bar mountings are checked at the start of every shift, and the machine is not used on forks if a locking pin is missing.

Specifications

Compatibility

According to the product card, the part number is 980/A7929P. The card also lists 980/A7928P, 123/04827. Models listed on the card: JCB 3CX, 4CX, 5CX, 214, 215, 217. Fit is confirmed by the part number. The catalogue also has the genuine version of this part. Other parts are in Pallet forks.

Fitting

Fit the forks on level ground with the machine made safe. Seat the fork bar in its mountings, space the forks to suit the load and fit the locking pins. Before the first lift, check that all the locks are in place.