HM380 chisel breaker tool 332/A3064 JCB, genuine

HM380 chisel breaker tool 332/A3064 is a genuine JCB part for the JCB hydraulic breakers. According to the product card, this part is a breaker tool for the HM380 breaker.

The tool (chisel or moil point) passes the piston's blow straight into the material and wears more than any other part. A moil point is used for breaking concrete and rock, a chisel for cutting asphalt and layered material. The tool slides in the bushes of the front head and is held by retaining pins. If the striking end of the tool mushrooms or its shank is loose in the bushes, impact energy is lost and the bushes and piston are damaged too. Burrs on the striking end of the tool are ground off.

Specifications

Compatibility

According to the product card, the part number is 332/A3064. The card also lists 332/A3063. Models listed on the card: JCB HM380, Volvo HB-07. Fit is confirmed by the part number and the breaker or machine serial number. The catalogue also has the aftermarket version of this part. Other parts are in JCB hydraulic breaker parts.

Fitting

Before working on the breaker, stop the machine, release the hydraulic pressure and lower the breaker to the ground in a stable position. If the nitrogen chamber is involved, release the gas pressure first as the maker instructs. After fitting the part, tighten the bolts to the specified torque, grease the tool bush and test the breaker briefly under light load.