Cast 8.6 kg bucket tip 207-70-14151 Komatsu, aftermarket

For the Komatsu machines: cast 8.6 kg bucket tip 207-70-14151, an aftermarket part. According to the product card, this part is a bucket tip.

Bucket teeth and tips protect the cutting edge and are the first parts to enter the ground when digging. A tooth system usually consists of an adaptor welded to the bucket and a replaceable tip fitted over it and held by a pin and retainer, so that only the tip is changed when it wears. Sharp tips of the right shape enter the ground with less force, cutting fuel use and wear on the bucket itself. Working with worn, shortened or broken tips wears the adaptor and damages the bucket lip. Ground type decides the choice of tips: tips with a thick wear zone for sandy and abrasive ground, sharp forged tips that take impact better for hard and stony ground. When a tip is changed, the adaptor nose is measured too, as a new tip on a worn adaptor sits loose, overloads the retaining pin and can fall off.

Specifications

Compatibility

According to the product card, the part number is 207-70-14151. Fit is confirmed by the part number and the adaptor or bucket model. The catalogue also has the aftermarket version (heavy-duty 9.4 kg) and aftermarket version (forged 7.1 kg) of this part. Other parts are in Buckets.

Fitting

Before replacing a wear part, lower the bucket to the ground, stop the machine and support the bucket so that it cannot move. Clean dirt and rust off the mounting faces and holes, seat the new part and tighten the bolts or fit the retainers as the maker specifies. Check the fixing again after the first hours of work.