10KhSND bucket repair edge 610x20x200 531/23601, aftermarket

10KhSND bucket repair edge 610x20x200 531/23601 is an aftermarket part for the JCB 3CX and 4CX backhoe loaders. 10KhSND is a low-alloy structural steel. The edge has 4 bolt holes.

The cutting edge is the thick steel plate forming the front lower edge of the bucket. On loader buckets the edge may be bolted or welded; double-sided bolt-on edges can be turned over and used a second time once one side is worn. On toothed buckets the tooth adaptors are welded to the edge. The edge is the most heavily worn structural part of the bucket, and if it is not replaced in time the bucket floor and sides start to wear. When the edge is replaced, the front of the bucket floor and the side cutter mountings are checked as well. The holes in the new edge are compared with those in the bucket.

Specifications

Compatibility

According to the product card, the part number is 531/23601. Fit is confirmed by the part number and the adaptor or bucket model. Other parts are in Buckets.

Fitting

Before replacing a wear part, lower the bucket to the ground, stop the machine and support the bucket so that it cannot move. Clean dirt and rust off the mounting faces and holes, seat the new part and tighten the bolts or fit the retainers as the maker specifies. Check the fixing again after the first hours of work.